跳到正文
Advanced Functional Materials· Seo·· 7 天前AI 评分27

用于新型LSPR传感器的Ag纳米颗粒与等离子体混合聚合物薄膜的设计与制备

Design and Fabrication of Ag Nanoparticles and Plasma Hybrid Polymer Thin Films for the New LSPR Sensor Application

AI 导读

研究提出并演示了一种低成本Ag基LSPR平台,将旋涂Ag墨水形成的纳米结构Ag层与PECVD沉积的等离子体聚合物介电覆盖层(Me-cyclohexane或Me-cyclohexane+TEOS)结合于玻璃或柔性聚合物基底。Ag层按岛状/团簇纳米结构处理,厚度32 nm与50 nm对比显示,50 nm样品在检测水性硫代乙醇酸(TGA)和代表性有机染料时浓度依赖强度变化更陡。

AI 深度导读基于原文整理的分节解读
背景
LSPR生物传感要实现低浓度目标分子检测,常用的是金基纳米颗粒的光学性质。本文提出以成本更低的银基平台替代,并针对纳米颗粒通常被理想化为单分散粒子的问题,改为按岛状/团簇纳米结构来处理银层。
做法
银层由旋涂银墨水形成,再以PECVD在其上沉积等离子体聚合物介电覆盖层(Me-cyclohexane或Me-cyclohexane+TEOS),基底为玻璃或柔性聚合物,覆盖层厚度与颗粒尺寸做了不同设置。银层厚度取32 nm与50 nm两种,其表面粗糙度被作为影响光学响应的因素,测量采用p偏振读出。
结论
在探测水相巯基乙酸(TGA)和几种代表性有机染料时,50 nm银纳米结构随浓度变化的强度变化比32 nm样品更陡。作者还用实验数据做了理论计算,以弥补折射率灵敏度(RIS)和品质因子方面的不足。
意义
结果把低成本银基LSPR平台的响应差异落到银层厚度与表面粗糙度上,而非理想单分散颗粒假设。研究目前是原理性演示(schematic studies),理论计算用于补强RIS与品质因子的评估,实际低浓度检测能力尚待后续验证。

原文摘要

出版方登记 · Crossref

Enabling detection of target molecules at low concentration is a key feature in localized surface plasmon resonance (LSPR) biosensors, which utilizes the remarkable optical properties of gold based metal nanoparticles (NPs). For a schematic studies, we here propose and demonstrate an approach on a low‐cost Ag‐based LSPR platform that combines a nanostructured Ag layer formed from spin‐coated Ag ink and a plasma‐polymer dielectric overlayer (Me‐cyclohexane or Me‐cyclohexane+TEOS) deposited by plasma‐enhanced chemical vapor deposition (PECVD) on glass (or flexible polymer) substrates with different thickness layer and particle size. Rather than assuming ideal, monodisperse nanoparticles, the Ag layer is treated as an island/clustered nanostructure whose thickness (32 vs 50 nm) and surface roughness govern the optical response. Using p‐polarized readout, we observe a steeper concentration‐dependent intensity change for the 50 nm Ag nanostructure compared with the 32 nm sample when probing aqueous thioglycolic acid (TGA) and representative organic dyes. In addition, a theoretical calculation utilizing our experimental data carry out for making up some weakpoint especially on refractive index sensitivity (RIS) and figure of merit.

页面未能读取全文,以上为出版方登记的摘要;方法与图表见原文

本页是 AI 精读,不转载论文原文;完整论文(含方法、图表与参考文献)见原文

来源:Advanced Functional Materials · doi.org