跳到正文
Journal of the American Chemical Society· Meyer·· 7 天前AI 评分31

组成复杂纳米晶–纳米片杂化物中的协同相互作用实现优异析氧反应活性

Synergistic Interactions Enable Superior Oxygen Evolution Reaction Activity in Compositionally Complex Nanocrystal–Nanosheet Hybrids

AI 导读

研究在低温胶体体系中原位共生成粒径<20 nm的多金属纳米晶与厚度<1 nm的In2S3基纳米片,形成组成复杂的纳米晶–纳米片异质结构。

AI 深度导读基于原文整理的分节解读
背景
硫尖晶石纳米颗粒因组成可调、电子导电和结构稳定而被视为有潜力的催化材料,用载体材料提升其性能是持续发展的路线之一。此前尚缺少组成复杂、可同时以原位和非原位方式构建的硫化物纳米晶—纳米片杂化体系。
做法
研究报道一种简单、可放大、低温的胶体方法,原位共生成直径小于20 nm的多金属纳米晶与厚度小于1 nm的In2S3基纳米片,形成组成复杂的杂化异质结构。也尝试后合成引入纳米片,制备非原位杂化物。
结论
原位形成的(Ni,Co,Fe)3S4纳米晶与(In,Fe,Mn)2S3纳米片杂化物在碱性析氧反应中表现最佳,10 mA/cm2下过电位低至283 mV。非原位仅添加5 wt%纳米片,即使(Ni,Co,Fe)3S4纳米晶过电位从362 mV降至312 mV。
意义
作者认为理想纳米片负载量应兼顾界面耦合与Ni/Co催化位点可及性,这是关键设计参数。该方法提供了低温胶体合成组成复杂、高均匀性(分散度<15%)硫化物纳米晶、纳米片或两者杂化物的路径;据其所知,这是首个原位与非原位形成均能提升性能的组成复杂杂化材料报道,也是In2S3作为载体骨架用于提升OER性能的首次报道。

原文摘要

出版方登记 · Crossref

Thiospinel nanoparticles are promising catalytic materials due to their compositional tunability, electronic conductivity, and structural stability. While significant gains in catalysis have been made through material engineering, one continuously developing route is through the use of support materials to enhance performance. Here, we report a simple, scalable, low-temperature method to coproduce colloidal multimetal nanocrystals (<20 nm in diameter) and In2S3-based nanosheets (<1 nm thick), forming compositionally complex hybrid nanocrystal–nanosheet heterostructures in situ. The in situ-formed heterostructures demonstrate enhanced catalytic activity in the oxygen evolution reaction (OER) in alkaline conditions; peak performance was achieved in heterostructures formed between (Ni,Co,Fe)3S4 nanocrystals and (In,Fe,Mn)2S3 nanosheets with overpotentials as low as 283 mV at 10 mA/cm2. Heterostructures can also be produced ex situ by introducing nanosheets, postsynthetically, to the nanocrystals, reducing the overpotential of (Ni,Co,Fe)3S4 nanocrystals from 362 mV to 312 mV with only a 5 wt % addition. This improvement highlights synergistic interactions in the heterostructures. These results suggest that an optimum nanosheet loading that maximizes effective nanocrystal–nanosheet interfacial coupling while preserving access to the Ni/Co-rich catalytic domains is the relevant design parameter. Our findings provide a low-temperature, colloidal route for synthesizing compositionally complex and highly uniform (<15% dispersity) sulfide nanocrystals, nanosheets, or heterostructures of the two with tunable structures and enhanced electrocatalytic performance. To our knowledge, this is the first report of a compositionally complex hybrid material that is able to enhance performance when formed both in situ or ex situ and the use of In2S3 as a scaffold for a support material for enhancing OER performance.

页面未能读取全文,以上为出版方登记的摘要;方法与图表见原文

本页是 AI 精读,不转载论文原文;完整论文(含方法、图表与参考文献)见原文

来源:Journal of the American Chemical Society · doi.org