超低电子温度等离子体在 high-k/金属栅薄膜刻蚀中降低损伤
Ultralow Electron Temperature Plasma for Damage-Reduced Processing of High-k/Metal Gate Films toward Vertically Stacked Nanosheet Devices
研究在相同衬底偏压(−100 V)下比较了超低电子温度(ULET,Te < 1 eV)等离子体与常规电感耦合等离子体对 high-k/金属栅(HKMG)薄膜的加工效果,ULET 等离子体由直流偏置栅网产生。
- 背景
- 垂直堆叠纳米片器件需要多次等离子体工艺来实现多个阈值电压,但反复暴露会在超薄高k/金属栅叠层中累积等离子体诱导损伤(PID)。
- 做法
- 作者采用直流偏压栅网产生超低电子温度(ULET,Te < 1 eV)等离子体,通过调控电子温度和离子能量分布函数(IEDF)抑制PID;并在相同衬底偏压(−100 V)下与常规电感耦合等离子体处理作对比。
- 结论
- 相比常规ICP,ULET等离子体把平均离子能量从131 eV降至101 eV,IEDF标准差降低44%(37.4降至20.9 eV);表面粗糙度最多下降58%,氟掺入最多下降58%,HfO2拉曼峰强度为常规ICP处理的1.32–1.81倍。
- 意义
- 结果把电子温度控制确立为降低HKMG薄膜PID的关键参数,指向垂直堆叠纳米片器件相关工艺的损伤削减路径。
原文摘要
出版方登记 · CrossrefIn vertically stacked nanosheet devices, repeated plasma-processing steps are required to realize multiple threshold voltages (Vth), but such repeated exposure can accumulate plasma-induced damage (PID) in ultrathin high-k/metal gate (HKMG) stacks. Here, we demonstrate that ultralow electron temperature (ULET, Te < 1 eV) plasma generated using a DC-biased grid suppresses PID by controlling the electron temperature and ion energy distribution function (IEDF). Compared with conventional inductively coupled plasma processing at the same substrate bias (−100 V), ULET plasma reduces the mean ion energy from 131 to 101 eV and reduces the IEDF standard deviation by 44% (from 37.4 to 20.9 eV). Consequently, surface roughness decreases by up to 58%, fluorine incorporation decreases by up to 58%, and HfO2 Raman-band intensities are 1.32–1.81 times those under conventional ICP processing. These results establish electron-temperature control as a key parameter for minimizing PID in HKMG films relevant to vertically stacked nanosheet devices.
页面未能读取全文,以上为出版方登记的摘要;方法与图表见原文
本页是 AI 精读,不转载论文原文;完整论文(含方法、图表与参考文献)见原文
来源:Nano Letters · doi.org